Description
Serum 1000 Accelerator is a specially formulated additive that significantly accelerates Serum 1000’s ability to cleanse and whiten. Serum 1000 has a long history of flawless performance in cleaning/bleaching mold and other severe biological/organic contamination. Serum 1000 Accelerator is formulated to cause Serum 1000 to generate millions of hydroxyl radicals that promote the cleansing and bleaching effect, especially on stubborn black mold stains. With the highly effective Serum 1000 Accelerator, you can now remove mold/organic contamination extremely quickly and be sure that all discoloration and stains will disappear, resulting in visually appealing and mold-free surfaces.
INSTRUCTIONS – 5 liter Serum 1000 pressure sprayer
Pour 5 liters of Serum 1000 into the Serum Sprayer. Add 120 ml of Serum 1000 Accelerator using the Pro-Blend bottle dispenser when you’re ready to cleanse. Screw the pump in immediately. Do not shake the sprayer. Start treatment immediately.
INSTRUCTIONS FOR USE – 1.25 liter Serum 1000 pressure sprayer
Pour 1 liter of Serum 1000 into the Serum Sprayer. Add 24 ml of Serum 1000 Accelerator using the Pro-Blend bottle dispenser when you’re ready to cleanse. Screw the pump in immediately. Do not shake the sprayer. Start treatment immediately.
OPERATING INSTRUCTIONS – Airless sprayer
Add the entire contents of the Serum 1000 Accelerator bottle (443 ml) to the 19 liter canister. Do NOT shake. Place the hose from your airless sprayer into the canister with the freshly mixed Serum 1000 and start the treatment immediately.
General for all application methods
Spray the activated Serum 1000 on all contaminated surfaces as normal. Work areas with heavy, visible mold or heavy dark stains with a stiff brush while spraying the mixture on these areas. You will see heavy foaming from surfaces with living organisms. Spray the foaming areas again after 10 minutes. If no foam appears, the area is clean. If it’s still foaming, apply the activated Serum 1000 mixture once more until the foaming stops. Wait at least 1 hour for surfaces to dry and HEPA vacuum all surfaces in the contaminated area thoroughly.
Consumption
1 Bottle of Serum 1000 Accelerator (443 ml) is enough for 1 canister of Serum 1000 (19 liters). If less than 19 liters are to be used, use 25 ml Accelerator per liter of Serum 1000. It is important not to exceed the dosage, as Serum 1000 will foam extremely heavily. Therefore, only use 25 ml Accelerator per liter of Serum 1000. Use the included Pro-Blend bottle dispenser for easy and correct dosing.
Durability
Serum 1000 with Accelerator has a shelf life of approximately 1-1.5 days. The activated Serum 1000 has a pH value of 9 (Serum 1000 has a pH value of 3.2). The only by-products of Serum 1000 Accelerator are water, oxygen and potassium acetate (a food additive).
