Description
ONE PRODUCT – THREE APPLICATIONS
1) Disinfectant concentrate for water disinfection.
Ideal for process water treatment, legionella control, irrigation systems, drinking water installations, water tanks and pipes.
After application, hydrogen peroxide completely decomposes into water and oxygen. The minimal amount of silver remaining after the peroxide is broken down inhibits the multi-plication of bacteria and has additional preservation properties, especially in water systems.
Unlike the highly concentrated Sanosil Super 25, Sanosil S015 is not a hazardous material and does not require special storage and transportation regulations.
- Effective water disinfection with a long-lasting effect.
- Highly effective against biofilm and VBNC bacteria.
- Odorless and tasteless in treated water.
- Does not produce AOX/trihalomethanes.
2) “Ready to use” disinfectant for advanced aerosol applications, AFNOR NFT 72-281 tested.
Fog or aerosol disinfection is used wherever large volumes need to be completely treated in a short time.
The use of S015 in combination with Sanosil Q-JET is popular especially in human, veterinary and dental medicine. Aerosol disinfection is the method of choice thanks to its complete surface coverage, especially in the fight against resistant microorganisms such as MRSA or germ contamination from unsafe sources. Small droplets of the disinfectant are thereby misted and distributed in the air using a suitable cold mist system. The disinfectant droplets develop their effect when they touch the surface to be cleaned. This allows not only time-saving treatment of entire rooms, but also disinfection of otherwise hard-to-reach corners and cracks.
Important: Aerosol disinfection is a supplement to conventional applications. It does NOT replace cleaning or classic wipe disinfection on heavily contaminated surfaces.
3) Disinfectant for use with Sanosil SFS foam concentrate for use in cavities.
Before use, mix Sanosil S015 disinfectant with Sanosil SFS (mold and spore fixing foam) and apply with a foam sprayer. Together with the foam concentrate, it forms a very light but stable biocide-containing active foam that can be used to combat mold and disinfect cavities (e.g. after water damage). In the liquid phase, bacteria, viruses and molds are killed. After the foam has dried, a disinfectant film forms, enveloping dead mold spores and mycelium components and fixing them to the surface.
Hydrogen peroxide is used as the active ingredient, which is further stabilized and its disinfecting effect is catalytically enhanced many times over by adding a minimal amount of silver ions.
This process can increase disinfection efficacy by up to 800%. After application, hydrogen peroxide completely decomposes into water and oxygen.
The small amounts of silver that remain on the surface after the peroxide has broken down inhibits germ propagation for up to 72 hours.
Product type: Ready-to-use solution
Ingredients: 7.5% Hydrogen peroxide (H2O2) and 0.075% Silver (Ag)
Effective against: Bacteria, yeast, viruses, fungi, spores
Suitable for: Wipe disinfection procedure, Targeted spraying with device, Water disinfection
Minimum shelf life: 2 years
